- UPC: 673400139238
- Document: https://github.com/spacehuhn/esp8266_deauther/wiki; https://github.com/spacehuhn/esp8266_deauther; Design files and schematic: https://github.com/lspoplove/DeautherOLEDV4.
- Note: The battery is not included and Power cost is around 80100mA. If you use 3500 mAh 18650 battery this board theoretically could work 35 hours.
- ESP8266 development board: This ESP8266 development board comes with an integrated 18650 charging system, OLED display and a 3 way momentary slide switch. It comes installed with the latest ESP8266 Deauther software. With this software, you can perform different attacks to test WiFi networks.
- NOTE: The ESP8266 does only support 2.4GHz. You can also use it to develop your own software. It is simple to use, just like any other ESP8266 development board.
- Charging current: 500mA, included 8dB antenna, included 2 acrylic case; 7 GPIO breakouts and 3.3 and 5V output; 4 LEDs to indicate battery status in real time; Power button: Click to turn on, double click to turn off; Protection: short, over charging, over discharging, temperature, polarity.
Note: Power cost is around 80~100mA. If you use 3500 mAh 18650-battery, this board theoretically could work 35 hours.
What is it?
This ESP8266 development board comes with an integrated 18650 charging system, OLED display and a 3 way momentary slide switch. It comes installed with the latest ESP8266 Deauther software. With this software, you can perform different attacks to test WiFi networks.
What makes it special?
Only 80~100mA power usage
Up to 35h of battery life with a 3500mAh 18650-cell
Charging current: 500mA
Included 8dB antenna
Included 2 acrylic case
7 GPIO breakouts and 3.3 and 5V output
4 LEDs to indicate battery status in real time
Power button: Click to turn on, double click to turn off
Protection: short, over charging, over discharging, temperature, polarity
GPIOs and hardware info:
Display: SH1106 1.3" OLED
Display SDA: GPIO 5 (D1)
Display SCL/SCK: GPIO 4 (D2)
WS2812b LED: GPIO 15 (D8)
Button Up: GPIO 12
Button Down: GPIO 13
Button Select: GPIO 14
Breakout Pins:
GPIO-16
GPIO-3(RXD)
GPIO-1(TXD)
GPIO-5(SDA)
GPIO-4(SCL)
GPIO-0
GPIO-2
3.3V
GND
5V
Package Including:
1 * ESP8266 development board deauther wifi OLED
1 * 10 Pin header
1 * 8db antenna
2 * Acylic cases
4 * Copper support
8 * screws
1 * Li-battery connector